1
Laboratoire de Technologie Industrielle et de l’Information, Faculté de Technologie, Université de Bejaia, 06000 Bejaia, Algeria
(adel.oubelaid@univ-bejaia.dz)
2
Faculty of Artificial Intelligence, Kafrelsheikh University, Kafrelsheikh, Egypt
(mahmoud.yasin@ai.kfs.edu.eg)
3
Department of System Programming, South Ural State University, 454080 Chelyabinsk, Russia
(abotalebmostafa@bk.ru)
Abstract :
machinery enterprises can benefit greatly from including energy efficiency models into their energy management and conservation efforts. Due to a lack of theoretical formulations, this paper integrates machining parameters and configuration parameters into energy efficiency models, with ML methods applied to increase generality. A three-year data set from a manufacturing facility serves as the basis for a comparison examination of two scenarios, with an emphasis on evaluating forecast precision, stability, and computing efficiency. To estimate future energy efficiency in Scenario 1, only cross-sectional data is utilized, completely discounting the wear and tear on spindle motors and cutting tools. In this study, we use five error measures to compare and contrast three classic ML algorithms: artificial neural networks, support vector regression, and Gaussian process regression. In Case 2, we build the a voting ensemble model in a more realistic setting, taking into account the dynamic characteristics of the aging spindle motor and tool wear. It is clear from the comparison that all of the Case 1 models experience performance erosion, but the proposed voting ensemble model is able to produce a sustainable increase in accuracy.
Keywords :
Machining system; energy efficiency modeling; deep learning; machine-learning
References :
[1] R. S. Altinta¸s, M. Kahya, and H. Ünver, “Modelling and optimization of energy consumption for feature based milling,” Int. J. Adv. Manuf. Technol., vol. 86, nos. 9–12, pp. 3345–3363, 2016..
[2] H. Luoke, T. Renzhong, W. Cai, Y. Feng, and X. Ma, “Optimisation of cutting parameters for improving energy efficiency in machining process,” Robot. Comput.-Integr. Manuf., vol. 59, pp. 406–416, Oct. 2019.
[3] J. Tuo, F. Liu, and P. Liu, “Key performance indicators for assessing inherent energy performance of machine tools in industries,” Int. J. Prod. Res., vol. 57, no. 6, pp. 1811–1824, 2019.
[4] S. Ma, Y. Zhang, J. Lv, H. Yang, and J. Wu, “Energy-cyber-physical system enabled management for energy-intensive manufacturing industries,” J. Clean. Prod., vol. 226, pp. 892–903, Jul. 2019.
[5] Z. M. Bi and L. Wang, “Energy modeling of machine tools for optimization of machine setups,” IEEE Trans. Autom. Sci. Eng., vol. 9, no. 3, pp. 607–613, Jul. 2012.
[6] G. Tian, Y. Ren, Y. Feng, M. Zhou, H. Zhang, and J. Tan, “Modeling and planning for dual-objective selective disassembly using AND/OR graph and discrete artificial bee colony,” IEEE Trans. Ind. Informat., vol. 15, no. 4, pp. 2456–2468, Apr. 2019.
[7] G. Tian, M. Zhou, and P. Li, “Disassembly sequence planning considering fuzzy component quality and varying operational cost,” IEEE Trans. Autom. Sci. Eng., vol. 15, no. 2, pp. 748–760, Apr. 2018.
[8] Q. Xiao, C. Li, Y. Tang, L. Li, and L. Li, “A knowledge-driven method of adaptively optimizing process parameters for energy efficient turning,” Energy, vol. 166, pp. 142–156, Jan. 2019.
[9] O. V. Arriaza, D.-W. Kim, Y. L. Dong, and M. A. Suhaimi, “Trade-off analysis between machining time and energy consumption in impeller NC machining,” Robot. Comput.-Integr. Manuf., vol. 43, pp. 164–170, Feb. 2017.
[10] H. Liu, E. Miao, X. Zhuang, and X. Wei, “Robust modeling method for thermal error of CNC machine tools based on ridge regression algorithm,” Precis. Eng., vol. 51, pp. 169–175, Feb. 2018.
[11] S. Zeng, X. Wan, W. Li, Z. Yin, and Y. Xiong, “A novel approach to fixture design on suppressing machining vibration of flexible workpiece,” Int. J. Mach. Tools Manuf., vol. 58, pp. 29–43, Jul. 2012.
[12] El-Kenawy, El-Sayed M., Marwa Eid, and Alshimaa H. Ismail. "A New Model for Measuring Customer Utility Trust in Online Auctions." International Journal of Computer Applications 975: 8887.
[13] Q. Xiao, C. Li, Y. Tang, and L. Li, “Meta-reinforcement learning of machining parameters for energy-efficient process control of flexible turning operations,” IEEE Trans. Autom. Sci. Eng., to be published, doi: 109/TASE.2019.2924444.
[14] L. Wu, H. Zhou, X. Ma, J. Fan, and F. Zhang, “Daily reference evapotranspiration prediction based on hybridized extreme learning machine model with bio-inspired optimization algorithms: Application in contrasting climates of China,” J. Hydrol., vol. 577, Oct. 2019, Art. no. 123960.
[15] A. M. Abdulshahed, P. L. Andrew, S. Fletcher, and A. Potdar, “Thermal error modelling of a gantry-type 5-axis machine tool using a grey neural network model,” J. Manuf. Syst., vol. 41, pp. 130–142, Oct. 2016.
[16] El-kenawy, El-Sayed M., Marwa M. Eid, and Abdelhameed Ibrahim. "Anemia estimation for covid-19 patients using a machine learning model." Journal of Computer Science and Information Systems 17, no. 11 (2021): 2535-1451.
[17] N. Zhang and D. Shetty, “An effective LS-SVM-based approach for surface roughness prediction in machined surfaces,” Neurocomputing, vol. 198, pp. 35–39, Jul. 2016.
[18] D. Kong, Y. Chen, and N. Li, “Gaussian process regression for tool wear prediction,” Mech. Syst. Signal Process., vol. 104, pp. 556–574, May 2018.
[19] I. Oleaga, C. Pardo, J. J. Zulaika, and A. Bustillo, “A machine-learning based solution for chatter prediction in heavy-duty milling machines,” Measurement, vol. 128, pp. 34–44, Nov. 2018.
[20] G. Kant and K. S. Sangwan, “Predictive modelling for energy consumption in machining using artificial neural network,” Procedia Cirp, vol. 37, pp. 205–210, Jan. 2015.
[21] W. Ming et al., “Integrated ANN-LWPA for cutting parameter optimization in WEDM,” Int. J. Adv. Manuf. Technol., vol. 84, pp. 1277–1294, Sep. 2016.
[22] G. Quintana, J. Ciurana, and J. Ribatallada, “Modeling power consumption in ball-end milling operations,” Adv. Manuf. Process., vol. 26, no. 5, pp. 746–756, 2011.
[23] M. H. F. Al-Hazza, E. Y. T. Adesta, F. M. Ali, D. Agusman, and M. Y. Suprianto, “Energy cost modeling for high speed hard turning,” J. Appl. Sci., vol. 11, no. 14, pp. 2578–2584, 2011.
[24] R. Bhinge, J. Park, K. H. Law, D. A. Dornfeld, M. Helu, and S. Rachuri, “Toward a generalized energy prediction model for machine tools,” J. Manuf. Sci. Eng., vol. 139, no. 4, 2017, Art. no. 041013.
[25] El-Kenawy, El-Sayed M., Seyedali Mirjalili, Fawaz Alassery, Yu-Dong Zhang, Marwa Metwally Eid, Shady Y. El-Mashad, Bandar Abdullah Aloyaydi, Abdelhameed Ibrahim, and Abdelaziz A. Abdelhamid. "Novel Meta-Heuristic Algorithm for Feature Selection, Unconstrained Functions and Engineering Problems." IEEE Access 10 (2022): 40536-40555
[26] T. Nguyen, “Prediction and optimization of machining energy, surface roughness, and production rate in SKD61 milling,” Measurement, vol. 136, pp. 525–544, Mar. 2019.
[27] Y. Han, J. Kim, and K. Lee, “Deep convolutional neural networks for predominant instrument recognition in polyphonic music,” IEEE/ACM Trans. Audio Speech., vol. 25, no. 1, pp. 208–221, Jan. 2017.
[28] S. Yun, J. Choi, Y. Yoo, K. Yun, and J. Y. Choi, “Action-driven visual object tracking with deep reinforcement learning,” IEEE Trans. Neural Netw. Learn. Syst., vol. 29, no. 6, pp. 2239–2252, Jun. 2018.
[29] T. Young, D. Hazarika, S. Poria, and E. Cambria, “Recent trends in deep learning based natural language processing [Review Article],” IEEE Comput. Intell. Mag., vol. 13, no. 3, pp. 55–75, Aug. 2018.
[30] V. T. Tran, F. Althobiani, and A. Ball, “An approach to fault diagnosis of reciprocating compressor valves using Teager-Kaiser energy operator and deep belief networks,” Expert Syst. Appl., vol. 41, no. 9, pp. 4113–4122, 2014.
[31] R. Zhao, R. Yan, Z. Chen, K. Mao, P. Wang, and R. X. Gao, “Deep learning and its applications to machine health monitoring,” Mech. Syst. Signal Process., vol. 115, pp. 213–237, Jan. 2019.
[32] X. Li, Q. Ding, and J.-Q. Sun, “Remaining useful life estimation in prognostics using deep convolution neural networks,” Rel. Eng. Syst. Saf., vol. 172, pp. 1–11, Apr. 2018.
[33] El-kenawy, El-Sayed M., Hattan F. Abutarboush, Ali Wagdy Mohamed, and Abdelhameed Ibrahim. "Advance artificial intelligence technique for designing double T-shaped monopole antenna." CMC-COMPUTERS MATERIALS & CONTINUA 69, no. 3 (2021): 2983-2995.
| Style | # |
|---|---|
| MLA | Adel Oubelaid, M. Y. Shams, Mostafa Abotaleb. "Energy Efficiency Modeling Using Whale Optimization Algorithm and Ensemble Model." Journal of Artificial Intelligence and Metaheuristics, Vol. 2, No. 1, 2022 ,PP. 27-35 (Doi : https://doi.org/10.54216/JAIM.020103) |
| APA | Adel Oubelaid, M. Y. Shams, Mostafa Abotaleb. (2022). Energy Efficiency Modeling Using Whale Optimization Algorithm and Ensemble Model. Journal of Journal of Artificial Intelligence and Metaheuristics, 2 ( 1 ), 27-35 (Doi : https://doi.org/10.54216/JAIM.020103) |
| Chicago | Adel Oubelaid, M. Y. Shams, Mostafa Abotaleb. "Energy Efficiency Modeling Using Whale Optimization Algorithm and Ensemble Model." Journal of Journal of Artificial Intelligence and Metaheuristics, 2 no. 1 (2022): 27-35 (Doi : https://doi.org/10.54216/JAIM.020103) |
| Harvard | Adel Oubelaid, M. Y. Shams, Mostafa Abotaleb. (2022). Energy Efficiency Modeling Using Whale Optimization Algorithm and Ensemble Model. Journal of Journal of Artificial Intelligence and Metaheuristics, 2 ( 1 ), 27-35 (Doi : https://doi.org/10.54216/JAIM.020103) |
| Vancouver | Adel Oubelaid, M. Y. Shams, Mostafa Abotaleb. Energy Efficiency Modeling Using Whale Optimization Algorithm and Ensemble Model. Journal of Journal of Artificial Intelligence and Metaheuristics, (2022); 2 ( 1 ): 27-35 (Doi : https://doi.org/10.54216/JAIM.020103) |
| IEEE | Adel Oubelaid, M. Y. Shams, Mostafa Abotaleb, Energy Efficiency Modeling Using Whale Optimization Algorithm and Ensemble Model, Journal of Journal of Artificial Intelligence and Metaheuristics, Vol. 2 , No. 1 , (2022) : 27-35 (Doi : https://doi.org/10.54216/JAIM.020103) |